Loading ...
Loading ...
Loading ...
Note
Auto Calibration is not available when [Bluetooth Mode] is set to [Transmitter].
The speakers emit very loud sound during the calibration and the volume cannot be
adjusted. Be considerate of your neighbors and any children who are present.
If the muting function has been activated before you perform Auto Calibration, the muting
function will shut off automatically.
It may not be possible to take the correct measurements or to perform Auto Calibration at
all if special speakers such as dipole speakers are used.
[137] Adjusting Settings
Speaker Settings
3. Connecting the optimizer microphone
Optimizer microphone (supplied)
1. Connect the supplied optimizer microphone to the AUTO CAL MIC jack.
2. Set up the optimizer microphone.
Place the optimizer microphone where you will sit and set it at the same height as your
ears.
[138] Adjusting Settings Speaker Settings
4. Selecting the front speakers
You can select the front speakers you want to operate.
Be sure to use the buttons on the receiver to perform this operation.
1. Press SPEAKERS on the receiver repeatedly to select the front speaker system you
want to operate.
Loading ...
Loading ...
Loading ...