Loading ...
Loading ...
GETTING TO KNOW YOUR HUMIDIFIER:
Model No. U-32000 (2.0 Gallon)
Model No. U-32010 (2.5 Gallon)
1.Tank 7.Medicine Cup
2.Cap 8.Tank Carry Handle (top)
3.Base 9.Tank Carry Handle (bottom)
4.Mist Chamber 10.Safety Switch
5.Power Control Knob 11.Locking Device
6.Humidistat Control Knob 12.Grill
Model No. U-32030 (3.0 Gallon)
INTRODUCTION
Congratulations on your purchase of your new Optimus Warm Mist Humidifier with
exclusive Warm Wicking Vapor System
TM
. You have purchased the newest and most
advanced technology available in warm mist humidifiers. This patent-pending technology
creates an extremely quiet, low-maintenance humidifier.
WHAT IS THE WARM WICKING VAPOR SYSTEM
TM
?
The Warm Wicking Vapor System
TM
is a new, revolutionary, patent-pending technology
that eliminates problems associated with other warm mist humidifiers. An absorption
sleeve placed on the heating element traps dirt and unwanted minerals, preventing
buildup on the heating element and near the steam outlet. The sleeve also works to
eliminate annoying bubbling and gurgling sounds common to other warm mist
humidifiers.
。No dangerous mineral buildup on the heating element
。No unsightly mineral buildup near the steam outlet
。No need for tedious cleaning of the heating element
ADVANTAGES OF MAINTAINING PROPER MOISTURE LEVELS
Dry indoor air can be uncomfortable and damaging to people, pets, plants and belongings.
Proper moisture levels can help alleviate or prevent:
。 Stuffy, dry nasal passages 。Dry plants, flowers
。 Dry coughs and irritated throats 。Static electricity
。 Parched lips and itchy, flaky skin 。Dry, cracking wood furniture
IMPORTANT! It is recommended that you remove and inspect the absorption
sleeve every time refilling the tank(s). Clean or replace the sleeve if any mineral
buildup or discoloration on the outside or inside of the absorption sleeve is visible.
Failure to properly maintain the absorption sleeve can result in poor performance
and possible malfunction of your humidifier. For best results, use distilled or
filtered water.
HOW YOUR HUMIDIFIER WORKS
Water flows from the tank(s) into the humidifier base. The water is absorbed up by the
absorption sleeve where it is filtered, heated, and converted into a warm mist. The warm
mist rises up through the mist chamber, dispensing comfortable, soothing, invisible
moisture into the air. During this process, unwanted minerals are trapped inside the
absorption sleeve material.
PRE-OPERATING INSTRUCTIONS
Locate an appropriate, level, flat surface near an electrical outlet for placement of the
humidifier. Be sure to place your humidifier on a water-resistant surface, since
water may cause damage to furniture. Position the humidifier so the power cord does
not become a trip hazard. To ensure proper ventilation, be sure to keep the
humidifier at least 6 inches away from a wall or any other object.
Remove the tank(s) from the base by grasping the top handle. Rotate the mist
Loading ...
Loading ...
Loading ...