Loading ...
Loading ...
Loading ...
Black plate (401,1)
北米Model "A8180BE-A" EDITED: 2012/ 4/ 5
2. Slide the rear combination light as-
sembly rearward and remove it from the
vehicle.
1) Stop light/Tail light
2) Rear turn signal light
3) Backup light
3. Remove the bulb socket from the rear
combination light assembly by turning it
counterclockwise.
4. Pull the bulb out of the bulb socket and
replace it with a new one.
5. Set the bulb socket into the rear
combination light assembly and turn it
clockwise until it locks.
6. Put the rear combination light assem-
bly into place while aligning the clip with
the guide on the vehicle.
7. Tighten the upper and lower screws.
& License plate light
1. Remove the mounting screws using a
Phillips screwdriver.
Maintenance and service 11-49
– CONTINUED –
11
Loading ...
Loading ...
Loading ...