Loading ...
Loading ...
Loading ...
Black plate (223,1)
北米Model "A8180BE-A" EDITED: 2012/ 4/ 5
If there is detrimental radio inter-
ference from this equipment to
“other radio stations,” move the
equipment to another location as
soon as possible to avoid radio
interference. The frequency band
used by this equipment is in the
2.4 GHz zone. The FH-SS mod-
ulation is employed as a modula-
tion method. The expected inflict-
ing interference distance is less
than 10 m (33 ft). This equipment
uses a full band and can avoid a
band used by a movable body
identification device.
& Using the Hands-free system
! Turning on/off the Hands-free mode
1) OFF hook switch
2) ON hook switch
3) Talk switch
To turn on the Hands-free mode, press the
OFF hook switch
. To turn off the
Hands-free mode, press the ON hook
switch
.
! Preparation for using the Hands-
free system
Before using the Hands-free system, it is
necessary to register a cell phone in the
system. Perform the following procedure
to register a cell phone.
1. Press the OFF hook switch
.
2. Select “ENGLISH”/“FRANÇAIS ” by
operating the “TUNE/TRACK/CH” dial.
Then “WELCOME!” will be displayed.
3. Press the “TUNE/TRACK/CH” dial or
the talk switch
.
4. Select the “RECORD NAME” menu.
5. Say the name to be registered.
6. Select the “CONFIRM” menu. After
“CAR M_MEDIA” is displayed, a pass key
is displayed.
7. Input the displayed pass key into the
cell phone while “PKY: ****” (type C
audio)/“PASS KEY: ****” (type D audio) is
displayed. If you input the correct pass
key, “PAIRED” is displayed and the
registration procedure is finished. If you
input an incorrect pass key, “FAILED” is
displayed and the registration procedure
was not successful.
NOTE
When the ignition switch is turned to
the “Acc” or “ON” position, the regis-
tered cell phone will be automatically
connected to the system.
! Menu list of the Hands-free system
Turn the “TUNE/TRACK/CH” dial to select
a menu, and then press the dial to enter
the selected menu.
Audio 5-45
– CONTINUED –
5
Loading ...
Loading ...
Loading ...