Loading ...
Loading ...
Loading ...
(82,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
Second-row seat (bench seat)
Third-row seat
2.
Second-row seat
You will find marks “
” at the second-row
seat cushion. These marks indicate the
positions of the lower anchorages (bars).
Each lower anchorage is located behind
the cover of seatback bottom.
Third-row seat
You will find marks “
” at the bottom of the
third-row seat seatbacks. These marks
indicate the positions of the lower an-
chorages (bars).
3. For second-row seat, peel off the
anchorage cover completely from the
selected side of the second-row seatback
to expose the anchorages (bars) to be
used for installation of the child restraint
system.
If it is hard to install the child restraint
system because the anchorage cover
returns to the original position, press the
anchorage cover to the seat cushion until it
is flat.
4. If there is a gap between the child
restraint system and the seatback, adjust
the seatback angle until good contact is
achieved.
5. If the child restraint system makes
contact with the head restraint of the rear
seating position where the child restraint
system is to be installed, raise the head
restraint to the extended position. If the
child restraint system still makes contact,
remove the head restraint. For details,
refer to “Head restraints” FP47.
CAUTION
Store the head restraint that has
been removed in the cargo area. Do
not place the head restraint in the
passenger compartment to prevent
it from being thrown around in the
passenger compartment in a sud-
den stop or a sharp turn.
Child restraint systems
80
Loading ...
Loading ...
Loading ...