Loading ...
Loading ...
Loading ...
(78,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
Raise the head restraint to the extended
position. If the booster seat still makes
contact, remove the head restraint. For
details, refer to “Head restraints” FP47.
CAUTION
Store the head restraint that has
been removed in the cargo area. Do
not place the head restraint in the
passenger compartment to prevent
it from being thrown around in the
passenger compartment in a sud-
den stop or a sharp turn.
For booster cushion:
Raise the head restraint to the extended
position. Do not remove the head restraint.
5. Run the lap and shoulder belt through
or around the booster seat/cushion and
the child following the instructions pro-
vided by its manufacturer. For booster
seat/cushion with a belt guide, use the
seatbelt through the belt guide.
6. Insert the tongue plate into the buckle
until you hear a click. Take care not to twist
the seatbelt.
Make sure the shoulder belt is positioned
across the center of child’s shoulder and
that the lap belt is positioned as low as
possible on the child’s hips.
7. To remove the booster seat/cushion,
press the release button on the seatbelt
buckle and allow the belt to retract.
WARNING
. Never use a belt that is twisted or
reversed. In an accident, this can
increase the risk or severity of
injury to the child.
. Never place the shoulder belt
under the child’s arm or behind
the child’s back. If an accident
occurs, this can increase the risk
or severity of injury to the child.
. The seatbelt should fit snugly in
order to provide full restraint.
Loose fitting belts are not as
Child restraint systems
76
Loading ...
Loading ...
Loading ...