Loading ...
Loading ...
Loading ...
(143,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
Example
1) Press to lock.
2) Press to unlock.
NOTE
Make sure that you do not leave the key
inside the vehicle before locking the
doors from the outside using the power
door locking switches.
& Automatic door locking/un-
locking
S02AC08
All doors, the rear gate and the fuel filler lid
are automatically locked or unlocked
under the following conditions.
. For automatic door locking
– When the vehicle speed reaches 12
mph (20 km/h) or higher (factory
default setting).
– When the select lever is shifted into
a position other than the “P” position.
. For automatic door unlocking
– When the driver’s door is open
(factory default setting).
– When the ignition switch is turned to
the “OFF” position.
– When the select lever is shifted into
the “P” position.
NOTE
. The user can change the automatic
door lock and unlock setting with the
combination meter. Refer to “Menu
screens” FP200.
. When locking the door by operating
the power door locking switches, auto-
matic door locking will not operate.
. When unlocking the door by operat-
ing the power door locking switches,
automatic door unlocking will not oper-
ate.
. When getting out of the vehicle from
a rear door, make sure to unlock all the
doors by pushing the unlock side of the
power door locking switch. If a rear
door is unlocked from the inside door
lever then the door is opened and
closed, the Key lock-in prevention
function will be triggered. All doors will
be unlocked, the Key lock-in prevention
warning indicator “
” will appear and
the warning chime will also sound.
& Key lock-in prevention func-
tion
S02AC06
Under the following conditions, all the
doors will not lock when the door lock
switch is pushed with the front door open.
. The key is still in the ignition switch
(models without “keyless access with
push-button start system”).
. The ignition switch is in the “ACC” or
“ON” position (models with “keyless ac-
cess with push-button start system”).
NOTE
. When leaving the vehicle, make sure
you are holding the key before locking
the doors.
. The factory setting (default setting)
for this function is set as “operational”.
This function’s operational/non-opera-
– CONTINUED –
Door locks
141
2
Keys and doors
Loading ...
Loading ...
Loading ...