Loading ...
Loading ...
Loading ...
en HomeConnect
48
a If the appliance is connected to the
energy management of your home
system, the display shows "Net-
work login Successful".
a If the appliance is not connected
to the energy management of your
home system, the display shows
"Network login Failed".
5. If the display shows "Network login
Failed", press again.
6. To close the basic settings, press
for approx. 3seconds.
Activating energy manager
Requirements
¡ "The energy manager is connected
to your home system." →Page47
¡ "A programme has been set."
→Page39
¡ "You have preselected a time."
→Page40
▶
Press .
a The display shows " Flex".
a The energy manager has access
to the appliance and can start it
during the preselected time.
a If the energy manager starts the
appliance earlier, the time display
"Finish in"/ "Finish at" will be up-
dated.
Disconnecting energy manager
from home system
1. To open the basic settings, press
for approx. 3seconds.
2. Press repeatedly until the display
shows "Energy manager".
3. To disconnect, press .
4. To close the basic settings, press
for approx. 3seconds.
Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the HomeConnect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
HomeConnect functions for use and
is only required when you want to
use the HomeConnect functions for
the first time.
Note:Please note that the
HomeConnect functions can only be
utilised with the HomeConnect app.
Information on data protection can be
retrieved in the HomeConnect app.
Declaration of Conformity
Robert Bosch Hausgeräte GmbH
hereby declares that the appliance
with Home Connect functionality
meets the essential requirements and
other relevant provisions of the Dir-
ective 2014/53/EU.
A detailed RED Declaration of Con-
formity can be found online at
www.bosch-home.com among the
additional documents on the product
page for your appliance.
2.4GHz band: 100mW max.
5GHz band: 100mW max.
Loading ...
Loading ...
Loading ...