Loading ...
Loading ...
Loading ...
en Before using for the first time
30
Appliance height 86.5cm with cutlery drawer
Level Top basket Bottom basket
1 max. ø 18 cm 34 cm
2 max. ø 20.5 cm 30.5 cm
3 max. ø 23 cm 28 cm
Before using for the first time
Before using for the
first time
Before using for the first time
Configure the settings for initial start-
up.
Performing initial start-up
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Requirement:"The appliance has
been installed and connected."
→Page14
1.
"Add special salt." →Page31
2.
"Add rinse aid." →Page33
3. Switch on the appliance.
a The display shows the settings for
initial start-up.
4. Press repeatedly until the display
shows the required setting.
Note:If you select Initial start-up
HomeConnect here, make further
settings using the HomeConnect
app on your mobile device.
– Language
– Initial start-up
– Time format
– Time setting
– Water hardness
– Rinse aid disp.
– Water connection
1
You can change these settings
and other "Basic settings"
→Page42 on the appliance at
any time or using the HomeCon-
nect app on your mobile device.
5. Press or repeatedly until the
display shows the right value.
You can change several settings.
6. To save the settings, press for
approx. 3seconds.
Water softening system
Water softening system
Water softening system
Hard water leaves limescale on the
tub and tableware and parts of the
appliance may become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...