Loading ...
Loading ...
Loading ...
HomeConnect en
47
Remote start
You can use the HomeConnect app
to start the appliance with your mo-
bile device.
Tip:If you start operation on the ap-
pliance itself, remote start is automat-
ically deactivated.
Activating remote start
Requirements
¡ "The appliance is connected to
your WLAN home network."
→Page44
¡ The appliance is connected to the
HomeConnect app.
¡ "A programme has been set."
→Page39
▶
Press .
a The display shows "Remote start is
activated.".
Note:If you open the appliance door,
remote start is automatically deactiv-
ated.
Deactivating remote start
Requirement:"Remote start is activ-
ated." →Page47
▶
Press .
a The display shows "Remote start
was deactivated. Please re-activ-
ate. ".
Remote Diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the HomeCon-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip:For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com
Energy manager
You can connect your appliance to
the energy manager of your home
system.
The energy management system will
manage the power supply from your
conventional and alternative energy
sources, e.g. photovoltaic system. If
your alternative energy sources pro-
duce sufficient energy within a
preselected time, the energy man-
ager will start the appliance. If your
alternative energy sources do not
produce sufficient energy, your appli-
ance will start at the latest time pos-
sible within this preselected time us-
ing power from conventional energy
sources.
Further information and the system
requirements for using the energy
manager can be found on the
HomeConnect website.
Connecting energy manager to
home system
Requirements
¡ "The appliance is connected to
your WLAN home network."
→Page44
¡ The appliance is connected to the
HomeConnect app.
¡ The connection to the energy man-
agement of your home system is
activated. Follow the instruction
manual of your home system.
1. To open the basic settings, press
for approx. 3seconds.
2. Press repeatedly until the display
shows "Energy manager".
3. To start connection, press .
4. Connect the appliance to the en-
ergy management of your home
system within the next 2minutes.
Loading ...
Loading ...
Loading ...