Loading ...
Loading ...
Loading ...
English40
Installation instructions
Installation instructions
Removing the Oven Door
WARNING
• Do not attempt to disengage the hinge catches with the door(s) removed from the
range. The hinge springs could release causing personal injury.
• Do not lift or carry the oven door(s) by the handle.
NOTE
When installing a backguard, always install it before sliding the range into place. See page
34.
To make the range easier to move, remove the door(s) to reduce weight.
Catch
Retaining arm
1. Open the door to its fully opened
position.
2. Use a pair of needle nose pliers or a
flat blade screwdriver to rotate the
catch over the retaining arm on each
hinge.
Door Gripping
Points
3. Lift the oven door to about a 15°
angle from the vertical position.
4. Hold the door with both hands just
below the handle and pull it away
from the oven while continuing to
lift.
NOTE
Wire connector under the right side of
the door should be disconnected while
removing door. Slightly lift the door and
disconnect the wire.
Install_NY9900M_PRORANGE_DOP48M96DLM_DA_DG68-00936A-00_EN+MES+CFR.indb 40 2017-05-12 7:36:49
Loading ...
Loading ...
Loading ...