Loading ...
Loading ...
Loading ...
54
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Self Clean function (some models only)
During a Self Clean
cycle
, the oven is louder
than usual.
This is normal: the oven’s cooling fans operate at their highest
speed.
The display shows
: but the oven door
will not open.
The oven door is locked
because the oven is still
too hot to be used for
cooking.
Wait until the Self Clean cycle has
finished. If you cancelled a Self
Clean cycle which was already
underway, the oven
still needs to cool down before it
can be used. The oven door will
automatically unlock.
At a point during a Self
Clean cycle, the function
dial halo goes out
and the temperature
indicator starts
displaying cascading
bars .
This is normal: the oven
is
in the last phase of the
Self
Clean cycle, cooling
down.
Wait until the Self Clean cycle
has finished. A long tone will
sound and the oven door will
automatically unlock when the
oven is ready to use.
I have cancelled a Self
Clean cycle but cannot
use the oven:
●
the oven door will
not open
●
the display is still
counting down
minutes or showing
:
●
the Self Clean
function indicator
is still lit the
temperature
indicator shows
cascading bars
●
the dials and controls
are unresponsive.
This is normal: if the
function dial halo is unlit,
you have
successfully cancelled
the
Self Clean cycle.
However, the
oven is still too hot to be
used for cooking and
needs to cool down.
Wait until the cool-down phase
has finished. A long tone will
sound and the oven door will
automatically unlock when the
oven is ready to use.
Note: depending on when the Self
Clean cycle was cancelled, the
cool-down phase may take up to
45 minutes.
The oven is beeping and
the display shows
or .
See section ‘Alert codes’ for instructions.
There is a power cut
during a Self Clean
cycle.
Power cut. The door will remain locked. Once
the power is turned back on,
the door will remain locked until
the oven has cooled to a safe
temperature.
Loading ...
Loading ...
Loading ...