Loading ...
Loading ...
Loading ...
PRODUCT ASSEMBLY- F438 - STEP # 1
1. Slide four 45mm X 75mm Cap (12) onto Base Frame.
2. Attach Rear Stabilizer (1) (with the serial number as shown) to the Right Base Frame
(3) and Left Base Frame (2) using four 1/2" X 4" Hex Bolts (17), and four 1/2" Nylon Nut
(23). NOTE: Backing plates that are welded to the Base Frames should be on the
outside of machine.
IMPORTANT: The back four 1/2" X 4" Hex Bolts (17) DO NOT get Washers (21).
3
17
17
If you are installing the F438 RFT on an already assembled
F430 Power Rack, please skip this portion and go to page 24.
IMPORTANT!
S E R I A L
1 2 3 4 5 6 7
NOTE: DO NOT tighten bolts until Step # 5
8
Loading ...
Loading ...
Loading ...