Loading ...
Loading ...
Loading ...
PRODUCT ASSEMBLY- F438 - STEP # 4
1. Attach Chin Up Bar (8) to the
Top Frames (7) using Backing
Plates (11) as shown, using
four 1/2" X 4" Hex Bolts (17)
and four 1/2" Nylon Nuts (23).
2. Install two 45mm X 75mm
Plugs (234) to Connector Top
Frame (203).
3. Attach the Connector Top
Frame (203) to Rear Top
Frame (6) using one Link Plate
(207) and two 3/8" X 2-3/4"
Hex Bolts (256), four 1/2“
Larger Washers (266) and two
1/2” Nylon Nuts (268).
NOTE: DO NOT tighten bolts until Step # 5
11
Loading ...
Loading ...
Loading ...