Loading ...
Loading ...
Loading ...
1. Slide both Bar Catches (10) onto each of the Rear Uprights (5) as shown.
2. Slide the Left & Right Pulley Height Adjusters (211L & 212R) onto Front Uprights (4) as
shown.
3. Attach both Top Frames (7) to Rear Top Frame (6), using six 3/8" X 3/4" Hex Bolts (19)
and six 3/8” Washers (22).
4. Simultaneously attach the Top Frames (7) and two Pulley Connector Plates (217) to the
Front Uprights (4) using four 1/2" X 3" Hex Bolts (256), eight 1/2” Larger Washers (266)
and four 1/2" Nylon Nut (268).
PRODUCT ASSEMBLY- F438 - STEP # 3
Step # 3
Assembled
NOTE: DO NOT tighten bolts until Step # 5
10
Loading ...
Loading ...
Loading ...