Loading ...
Loading ...
Loading ...
Assembly is complete!
Please take the following steps before using the RFT Rack Functional Trainer:
1. Make certain all bolts are tightened securely.
2. Make certain all cables are seated into all pulley grooves. A cable rubbing
against steel will peel the nylon coating, voiding warranty and resulting in a
need for replacement.
3. Pre-stretch the cables. Put the Selector Pin (246) in the bottom hole on the
weight stack. Pull on the cables with great force, helping remove any kinks and
providing any initial cable stretch.
4. Be aware the cables can loosen and slightly stretch upon initial use.
5. The cables should be adjusted as tight as possible, but not so tight as to lift
the Top Plate (222) above the weight stack. Be certain to secure the jam nuts
after adjustments are made.
6. For better performance, apply silicone spray or liquid to the Guide Rods (204).
7. Enjoy many years of a happy & healthy lifestyle.
PRODUCT ASSEMBLY- F438 - COMPLETE
NOTE: IF YOU SEEM TO BE MISSING A PART, DO NOT WORRY, IT
LIKELY HAS BEEN PRE-INSTALLED FOR QUALITY CONTROL
19
Loading ...
Loading ...
Loading ...