Dji NAZA-M LITE User Manual

Loading ...

Port Description

Main Controller

A

For roll control (left/right)

E

For pitch control (front/back)

T

For throttle control

R

For rudder control

U

For Control Mode Switch

X1

For gimbal pitch control

Or for gain tuning

X2

For D-Bus (S-Bus compatible)

Or for gain tuning

Or for IOC switch

X3

For voltage monitor (Connect with VU V-SEN port)

M1

To #1 rotor

M2

To #2 rotor

M3

To #3 rotor

M4

To #4 rotor

M5

To #5 rotor

M6

To #6 rotor

F1

To gimbal roll servo

F2

To gimbal pitch servo

LED

LED port, for LED wire connection from Versatile Unit

EXP.

GPS port, for GPS module wire connection.

(In three-pin ports, pins near the nicks are signal pins.)

Versatile Unit

V-SEN

V-SEN port: To MC X3 port, for monitoring battery voltage and supplying power

 Orange wire (signal wire) output: ±3.3V

 Red wire (power wire) output: 4A@5V

LED

LED wire, to MC LED port.

Micro-B USB port: PC connection for configuration and firmware upgrades.

Optional GPS & Compass

Connect to the EXP. port.

Loading ...

Dji NAZA-M LITE Cameras

User Manual - Page 42