Loading ...
Loading ...
Loading ...
©2014 DJI. All Rights Reserved. 36
STEP3: Hold your aircraft vertically and rotate it (its nose is downward) around the vertical axis (about 360
o
)
until the LED turns off, meaning the calibration is finished.
STEP4: The LED indicator will show whether the calibration was successful or not.
If the calibration was successful, calibration mode will exit automatically.
If the LED keeps flashing quickly Red, the calibration has failed. Switch the control mode switch one
time to cancel the calibration, and then re-start from step 1.
Tips:
If you keep having calibration failure, it might suggest that there is very strong magnetic interference around
the GPS & Compass module, please avoid flying in this area.
Loading ...
Loading ...
Loading ...