Nautilus E614 Elliptical

CONSOLE SETUP MODE

The Console Setup Mode lets you input the date and time, set the units of measurement to either English or Metric,

changethemachinetype,controlthesoundsettings(on/off),orseemaintenancestatistics(ErrorLogandRunHours–

for service technician use only).

1. Hold down the PAUSE/END button and Right button together for 3 seconds while in the Power-Up Mode to go into

4. The Console display shows the Time prompt with the current setting. Push the Increase/Decrease buttons to adjust

thecurrentlyactivevalue(ashing).PushtheLeft/Rightbuttonstochangewhichsegmentisthecurrentlyactivevalue

(hour / minute / AM or PM).

5. PushOKtoset.

6. The Console display shows the Units prompt with the current setting. To change, push OK to start the Units option.

Push the Increase/Decrease buttons to change between “MILES” (Imperial English units) and “KM” (metric units).

Note: If the units change when there is data in User Statistics, the statistics convert to the new units.

8. The Console display shows the Machine Type prompt with the current setting. Push the Increase/Decrease buttons to

10. The Console display shows the Sound Settings prompt with the current setting. Push the Increase/Decrease buttons

to change between “ON” and “OFF”.