Loading ...
Loading ...
Loading ...
36
4 Permanent settings in programming mode
The Y, < and > symbols flash, the
machine heats up.
The machine is rinsed, water flows out of the
coffee spout. The rinse stops automatically.
Your ENA is ready for use.
Daily maintenance
To ensure that you get many years of reliable
service out of your ENA and to guarantee the
optimum coffee quality, the machine requires daily
maintenance.
T Remove the drip tray.
T Empty the coffee grounds container and
drip tray and rinse with warm water.
E Always empty the coffee grounds container
when the machine is switched on. This is the
only way of resetting the coffee grounds
counter to zero.
T Reinsert the coffee grounds container and
the drip tray.
T Rinse the water tank with clean water.
T Wipe the surface of the machine with a
clean, soft, damp cloth (e.g. microfibre
cloth).
Switching off the machine
When the ENA is switched off, the system is
automatically rinsed if a speciality coffee has been
prepared.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button.
The Y, < and > symbols flash. The
machine is rinsed, water flows out of the
coffee spout.
The rinse stops automatically. Your ENA is
switched off.
E When the ENA is switched off with the On/
Off button, the machine does not consume
standby energy.
E If no action is performed on the machine for
30minutes, the ENA will automatically
switch off to save energy.
4 Permanent settings in pro-
gramming mode
Inserting and activating the filter
Your ENA no longer has to be descaled if you are
using the CLARIS Blue filter cartridge. If you did not
activate the filter cartridge the first time you used
the machine, you can do this now as follows.
E Perform the ‘inserting the filter’ operation
without any interruptions. This will ensure
that your ENA always produces its best.
Precondition:Your ENA is ready for use.
T Touch the ; and _ symbols for approxi-
mately 2 seconds.
The ;, _, & and L symbols light up brightly.
! T Touch the Filter symbol for approximately
2 seconds.
The Water Tank symbolM lights up.
T Remove the water tank.
T Open the filter holder.
T Insert the filter cartridge into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
Loading ...
Loading ...
Loading ...