Loading ...
Loading ...
Loading ...
34
2 Preparation
T Remove the water tank and rinse with cold
water.
T Fill the water tank with fresh, cold water and
reinsert it.
Determining the water hardness
You can find out what the water hardness is by
using the Aquadur® test strip supplied as standard.
T Hold the test strip briefly (for one second)
under running water.
T Shake off the water.
T Wait for about one minute.
T You will then be able to read the degree of
water hardness from the discolouration of
the Aquadur® test strip and the description
on the packaging.
The water hardness can now be set.
2 Preparation
E While a speciality coffee is being prepared,
you can stop preparation at any time. Simply
touch the symbol for the product in
question.
E Before and during the grinding operation
you can select the coffee strength for
ristretto Y, espresso < and coffee >:
‘normal’ (;), ‘strong’ (_).
The machine always uses the preset amount of
water for the type of coffee in question. You can
change this setting (see Chapter 2 ‘Preparation –
Permanently setting the amount of water for the
cup size’).
Your ENA features an energy-saving mode: Soon
after the last preparation, the ENA stops heating
up. To indicate that the machine is in energy-
saving mode, after about 5 minutes the brightness
of all the symbols is reduced. The ENA must heat
back up before the next preparation.
Coffee tastes best served hot. A cold porcelain cup
cools the beverage – and impairs the taste. We
therefore recommend prewarming the cups. The
full coffee aroma can develop only in prewarmed
cups. You can purchase a JURA cup warmer from
your specialised dealer.
Ristretto, espresso and coffee
Ristretto Y, espresso < and coffee > are all
prepared following this model.
Example:Proceed as follows to prepare one coffee.
Precondition:Your ENA is ready for use.
T Place a cup under the coffee spout.
> T Touch the Coffee symbol to start prepara-
tion.
The coffee symbol > and coffee strength
symbol (; or _) flash, the preset amount of
water flows into the cup.
Preparation stops automatically. Your ENA is
once more ready for use.
Permanently setting the amount of water
for the cup size
It is easy to make permanent settings for the
amount of water for all speciality coffees according
to the cup size. Adjust the amount once as shown
Loading ...
Loading ...
Loading ...