Loading ...
Loading ...
Loading ...
35
3 Daily operation
pt
es
nl
it
fr
ru
en
de
in the following example. Every time you prepare a
drink in the future, this amount of water will be
dispensed.
Example:Permanently adjust the amount of
espresso to the cup size.
Precondition:Your ENA is ready for use.
T Place a cup under the dual spout.
< T Touch the Espresso symbol for about
3 seconds until the RistrettoY and
coffee> symbols appear again.
< T Release the Espresso symbol.
The espresso is prepared. The Espresso
symbol< and coffee strength symbol
(; or _) are flashing.
< T Touch the Espresso symbol as soon as there
is enough espresso in the cup.
Preparation stops. The amount of water for
one espresso is permanently stored.
The Espresso symbol < and coffee strength
symbol (; or _) flash until the machine is
ready for use again.
E You can alter this setting at any time by
repeating the above procedure.
Ground coffee
You can choose to use a second coffee variety, for
example decaffeinated coffee, with the powder
chute for ground coffee.
E Use ground coffee which is not ground too
finely. Very fine coffee can block up the
system so that the coffee only comes out in
drips.
E Never add more than one level measuring
spoon of ground coffee.
E The desired speciality coffee must be
prepared within approximately one minute
after filling with the ground coffee.
Otherwise the ENA stops the operation and
is once more ready for use.
E If you did not add a sufficient amount of
ground coffee, the Y, <, > and v symbols
flash and the ENA stops the operation.
All speciality coffees with ground coffee are
prepared following this model.
Example:Prepare a cup of coffee using ground
coffee.
Precondition:Your ENA is ready for use.
T Place a cup under the coffee spout.
T Open the powder chute for ground coffee.
The Ground Coffee symbolv lights up.
T Place the filler funnel for ground coffee on
the powder chute.
T Place one level measuring spoon of ground
coffee into the filler funnel.
T Close the powder chute for ground coffee.
The Y, <, > and v symbols flash.
The Y, < and > symbols light up.
> T Touch the Coffee symbol to start prepara-
tion.
The Coffee symbol > flashes, the preset
amount of water flows into the cup.
Preparation stops automatically. Your ENA is
once more ready for use.
3 Daily operation
Switching on the machine
Daily maintenance of the machine and hygiene
when handling coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
When the machine is switched on, it is automati-
cally rinsed.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button to switch the
machine on.
Loading ...
Loading ...
Loading ...