Loading ...
Loading ...
Loading ...
Tire Puncture u Removing Wheels
87
continued
Troubleshooting
6.
Install the brake caliper and tighten the
fixing bolts.
7.
After installing the wheel, apply the
brake lever several times, then check if
the wheel rotates freely. Recheck the
wheel if the brake drags or if the wheel
does not rotate freely.
8.
Check the clearances between each
surface of the brake disc and the brake
bracket (not the brake pads) are
symmetrical.
u If the clearances are symmetrical,
loosen the right axle pinch bolts and
pull the right fork outward or push
inward to adjust the clearance.
9.
Tighten the left axle pinch bolts.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Torque: 23 lbf·ft (31 N·m, 3.2 kgf·m).
NOTICE
When installing the brake caliper into position on the fork
leg, carefully fit the brake disc between the pads to avoid
scratching them.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m).
Brake bracket
Brake
disc
Loading ...
Loading ...
Loading ...