Loading ...
Loading ...
Loading ...
Final Drive Oil u Changing Final Drive Oil
66
Maintenance
Changing Final Drive Oil
1.
Place your motorcycle on the side stand
on a level surface.
2.
Place a drain pan under the drain bolt.
3.
Remove the oil fill hole cap, O-ring, drain
bolt, and sealing washer to drain the oil.
u Discard the oil at an approved
recycling center.
4.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
5.
Fill the final gear with the recommended
oil.
2
P. 44
6.
Check the oil level. It should be flush
with the lower edge of the oil fill hole.
7.
Install a new O-ring onto the fill hole cap.
Tighten the fill hole cap.
8.
Check that there are no oil leaks.
Oil fill
hole cap
Lower edge
Drain bolt
O-ring
Sealing
washer
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m).
Required oil: 4.4 US oz (130 cm
3
)
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m).
Loading ...
Loading ...
Loading ...