Loading ...
Loading ...
Loading ...
32
CARE AND CLEANING
Aluminum Foil and Utensils
Remove and replace storage drawer
Use the storage drawer for storing cooking utensils. The
drawer can be removed to facilitate cleaning under the
range. Use care when handling the drawer.
Replacing the Oven Light
Replacing the oven interior light bulb:
The interior oven light is located at the rear of the oven
cavity and
covered with a glass shield. The glass shield
must be in place whenever the oven is in use (Figure 31).
1. T
urn electrical power off at the main source or unplug
th
e appliance.
2. Remove the interior oven light shield after removing the
wir
e holder by carefully moving the wire to the side of
the glass shield. The tension from the wire holds the
glass shield in place.
3. Pull the shi
e
ld straight out. Do not twist or turn.
4. Replace the bulb with a new appliance bulb.
5. Replace the glass oven light sh
ield. Replace wire
holder.
6. Turn the power back on again at the main source (or
p
lug the appliance back in).
7. Be sure to reset the time of day on the clock.
Never cover any slots, holes, or passages in the oven
bottom or cover an entire oven rack with materials such
as aluminum foil. Aluminum foil linings may trap heat,
causing a fire hazard.
Protective Liners — Do not use aluminum foil to line the
oven
bo
ttom. Improper installation of these liners may
result in risk of electric shock or fire.
Aluminum foil - Use of aluminum foil on a hot cooktop can
damage the cooktop. Do not use thin aluminum cooking
utensils or allow aluminum foil to touch the surface
elements under any circumstances.
WARNING
IMPORTANT
Be sure the oven is unplugged and all parts are cool
before replacing the oven light.
Figure 30: Oven light protected by glass shield
CAUTION
wire
holder
glass
shield
Loading ...
Loading ...
Loading ...