Loading ...
Loading ...
Loading ...
1 Turn your machine on.
Supply power by using six AAA batteries or the
optional AC Adapter, and then press .
2 Set the language.
The default setting is [English].
3 Set the unit of measurement.
The default setting is [inch].
NOTE
• The machine automatically turns off if no keys are
pressed within five minutes.
• To cancel any operation, press .
• After pressing , [Accepted] appears for
approximately one second.
This function allows you to set the brightness of the
LCD display. You can select from five levels of
brightness. The default setting is [
0
].
• To return to the default setting, press .
Over time, the Cutter Blade may become blunt from
repetitive use. If the Cutter does not cut tape
cleanly, replace the Cutter Unit. Contact your local
authorized Brother reseller and order item TC-4, the
Cutter Unit.
X Replacing the Cutter Unit
1. Remove the two sections of the Cutter Unit
(green) in the direction of the arrows as
illustrated below
2.
2. Install a new Cutter Unit. Push it in gently until
it snaps into place.
Initial Settings
/ [Language]
/ [English / Español /
Français / Hrvatski / Italiano /
Magyar / Nederlands / Norsk / Polski /
Português / Portug. (BR) / Românã /
Slovenski / Slovenský / Suomi /
Svenska / Türkçe / ýeština / Dansk /
Deutsch] .
/ [Unit]
/ [inch / mm] .
Contrast
/ [LCD Contrast]
/ [-2 / -1 / 0 / +1 / +2]
Supplies and Accessories
Cassettes: See the included Supplies and
Accessories Guide.
AC Adapter: AD-24ESA
Cutter Unit: TC-4 (replacement)
WARNING
Do not touch the cutter blade directly with your
fingers.
Cutter
Board
English
Loading ...
Loading ...
Loading ...