Loading ...
Loading ...
Loading ...
EN – 16
ATTACHMENT BRAKE REPLACEMENT
Remove Attachment Brake
IMPORTANT: Save all hardware for reinstallation.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
3. Remove auger housing. See Separate Housing From
Frame on page 7.
See Figure 25.
4. Disconnect extension spring from attachment brake
arm.
5. Remove hardware retaining attachment brake arm to
brake mount bracket.
6. Remove brake arm.
Install Attachment Brake
1. Position pivoting end of attachment brake arm in brake
mount bracket and secure with one hex bolt and top
locking flange nut, but DO NOT overtighten.
2. With flathead screwdriver or similar pry bar, reconnect
extension spring to attachment brake arm.
See Figures 26 and 27.
3. Engage and disengage attachment clutch to verify
brake roller on attachment idler does not interfere with
brake pad.
IMPORTANT: Make sure brake roller does not bind.
4. Reinstall auger housing to frame. See Reinstall Auger
Housing on page 10.
Figure 25
1. Top Locking Flange Nut
2. Hex Bolt
3. Attachment Brake Arm
4. Extension Spring
1
2
4
3
Figure 26
Attachment Clutch Disengaged / Brake Engaged
1. Brake Pad
2. Brake Roller
1
2
Figure 27
Attachment Clutch Engaged / Brake Disengaged
1. Brake Pad
2. Brake Roller
1
2
Loading ...
Loading ...
Loading ...