FEATURES
• AC outlet
• Four USB charging ports (4.8A total current)
• Compact design
• Screws and adhesive for secure placement
SETTING UP YOUR DESKTOP SURGE
TOWER
Installing the tower with the mounting tape
1 Tear the paper cover o of one side of the foam
tape and attach the foam tape on the bottom of
mounting base.
2 Remove the paper cover o the other side of the
foam tape.
3 Attach the mounting base on the table. Proceed to
step 4.
-OR-
1 Use the screws to attach the mounting base to a
table, desk, or other mounting surface.
2 Align the main unit with the retaining hooks on
the base.
3 Rotate the main unit counterclockwise slightly to
secure it to the base.
Before using your new product, please read these instructions to prevent any damage.
4 Plug the desktop surge tower into an AC wall
outlet.
USING YOUR DESKTOP SURGE TOWER
Powering and charging an AC device
1 Plug an AC adapter into the AC outlet.
2 Connect your device to the output of the AC
adapter.
Charging from the USB ports
• Connect your device to the USB charging port with
a USB cable. The connected device begins
charging.
QUICK SETUP GUIDE
Desktop
Surge Tower
NSPDTSU148
PACKAGE CONTENTS
• Desktop Surge Tower
• 5 ft. power cord
• Screws (2)
• Square foam tape
• Quick Setup Guide
AC adapt-
er spaced
outlet
USB
ports
Plug in
V1 ENGLISH 17-0229
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S.
and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
SPECIFICATIONS
• Dimensions (L×W×H): 2.5" × 5.96" × 2.5"
(not including power cord)
(63.4 × 151.4 × 63.4 mm)
• Weight: 404.6g/ 0.89lb
Electrical specications:
• Load rating: 10 amps
• Line voltage: 125V AC @ 60 Hz
• USB Rating: Four USB ports with a total of 4.8A, 5V
DC
• UL-1310 certied
Other specications:
• Connected equipment limited warranty: $50,000
max
SAFETY INFORMATION
• CAUTION: Do not install this device if there is not
at least 30 ft. (10 m) or more of wire between the
electrical outlet and the electrical service panel.
• TO REDUCE THE RISK OF ELECTRIC SHOCK USE
ONLY INDOORS.
• DO NOT “daisy chain”.
• DO NOT use with any aquarium equipment.
• Always ensure the product is unplugged from the
electrical outlet before relocating or cleaning it.
• Keep the power cord and product away from
heated surfaces.
• DO NOT use if correctly grounded outlets are not
available.
• This device features internal protection that will
disconnect the protective component at the end
of its useful life, but will maintain power to the
load – WHICH WILL BE UNPROTECTED. If you don’t
want your equipment at risk, follow the
manufacturer’s instructions for replacing the
device.
• Use this product in the upright position.
LEGAL NOTICES
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment o and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Warning: Changes or modications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
