Loading ...
Loading ...
Loading ...
Troubleshooting en
23
Troubleshooting
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting our after-sales service. This will avoid unne-
cessary costs.
Malfunctions
Fault Cause troubleshooting
Processed food does not fall
into the bowl.
Outlet opening or housing is
blocked.
1. Finish processing and unplug from
the mains.
2. Remove the accessory.
3. Take the accessory apart and re-
move the blockage.
Cutting disc does not rotate
although the base unit is run-
ning.
Lid is not fitted and engaged
properly.
Check whether the lid is fitted prop-
erly.
→"Assembling the continuous feed
shredder", Page19
Accessory has been over-
loaded and the disc holder
shaft has broken at the pre-
determined breaking point.
You can order a new disc holder
from customer service under order
number 00630760.
Loading ...
Loading ...
Loading ...