Loading ...
Loading ...
Loading ...
Cleaning and servicing en
21
Wait until the appliance stops.
7. Pull out the mains plug.
Emptying the bowl
Tip:You can empty the bowl during
processing without removing the con-
tinuous feed shredder.
1. Set the rotary switch to .
Wait until the appliance stops.
2. Press the release button and raise
the swivel arm until it engages.
→Fig.
17
3. Turn the bowl clockwise and re-
move.
→Fig.
18
4. Empty the bowl.
Removing the continuous
feed shredder
WARNING
Risk of injury!
Improper use may cause injuries.
Only attach and remove accessor-
ies once the drive has stopped
and the appliance has been un-
plugged.
1. Rotate the continuous feed shred-
der anticlockwise until it releases.
→Fig.
19
2. Remove the continuous feed
shredder from the base unit.
→Fig.
20
Dismantling the continuous
feed shredder
WARNING
Risk of cutting!
The cutting discs have sharp blades
and edges.
Only take hold of the cutting discs
by the edge.
Never touch the sharp blades and
edges with bare hands.
1. Rotate the lid anticlockwise.
→Fig.
21
Markings and must match
up.
2. Remove the lid.
→Fig.
22
3. Take hold of the disc holder by the
shaft and take out of the housing
with the cutting disc.
→Fig.
23
4. Take hold of the cutting disc by
the edge and remove.
→Fig.
24
Tip:Clean all parts immediately after
use so that residues do not dry on.
Cleaning and servicing
Cleaning and servicing
To keep your accessory working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Dishwasher-safe components
Find out here which components can
be put in the dishwasher.
ATTENTION!
Some parts may be damaged if they
are put in a dishwasher.
Only put dishwasher-safe parts in
the dishwasher.
Only use programmes that do not
heat the water above 60°C.
Do not wedge plastic parts in the
dishwasher.
Dishwasher-safe:
¡ Housing
¡ Lid
¡ Pusher
¡ Disc holder
Loading ...
Loading ...
Loading ...