Loading ...
Loading ...
Loading ...
Before using for the first time en
19
Note:Spare parts with a predeter-
mined breaking point are not covered
by our warranty obligations. A new
disc holder is available from cus-
tomer service under order number
00630760.
Before using for the first time
Before using for the first
time
Prepare the base unit and the ac-
cessories for use.
Preparing the base unit
Note:The food processor shown in
the pictures may differ from your
model in terms of shape and fea-
tures.
1. Set up the base unit as described
in the main operating instructions.
2. Press the release button and raise
the swivel arm until it engages.
→Fig.
3
3. Place the bowl in the base unit.
→Fig.
4
4. Turn the bowl anticlockwise until it
engages.
→Fig.
5
5. Press the release button and push
the swivel arm down until it en-
gages in position1.
→Fig.
6
6. Press down the protective cover
for drive2 at the marking and
remove.
→Fig.
7
Assembling the continuous
feed shredder
WARNING
Risk of cutting!
The cutting discs have sharp blades
and edges.
Only take hold of the cutting discs
by the edge.
Never touch the sharp blades and
edges with bare hands.
WARNING
Risk of injury!
Improper use may cause injuries.
Never assemble the accessories
on the base unit.
1. Grip the disc holder level with the
wings.
→Fig.
8
The two plastic tips must point up.
2. Take hold of the required cutting
disc by the edge and fit onto the
disc holder with the side you re-
quire facing up.
‒ Fit single-sided discs with the
blades or serrations facing up.
‒ Fit reversible slicing discs with
the required marking facing up.
→"Markings on the reversible
slicing discs", Page18
→Fig.
9
3. Insert the disc holder with the cut-
ting disc into the housing.
→Fig.
10
4. Place the lid on the housing.
→Fig.
11
Markings and must match
up.
5. Rotate the lid clockwise until it en-
gages.
→Fig.
12
Markings and must match
up.
Loading ...
Loading ...
Loading ...