Loading ...
Loading ...
Loading ...
en Basic operation
20
Fitting continuous feed shred-
der onto the base unit
WARNING
Risk of injury!
Improper use may cause injuries.
Only attach and remove accessor-
ies once the drive has stopped
and the appliance has been un-
plugged.
1. Place the continuous feed shred-
der on drive2 as shown.
→Fig.
13
2. Push the continuous feed shredder
down and rotate clockwise until it
engages.
→Fig.
14
The continuous feed shredder
must be securely connected to the
base unit.
Basic operation
Basic operation
You can find out everything you need
to know about operating your ac-
cessory here.
Recommended speeds
Observe the recommended speeds
for optimum results.
Note:Your model is equipped with a
4- or 7-level rotary switch depending
on the features of the appliance. The
recommended speeds for the 4-level
rotary switch are always shown in
brackets in these instructions for use.
Setting Use
7 (4) Slicing, shredding or grating food.
¡ Reversible slicing disc
¡ Grating disc, medium-fine
¡ Potato fritter disc
¡ Asian vegetable disc
Setting Use
3-4 (2-3) Shred food coarsely or finely us-
ing the reversible shredding disc,
e.g. fruit or vegetables.
Processing food with the con-
tinuous feed shredder
WARNING
Risk of injury!
¡ Rotating drives, tools or accessory
parts may cause injury.
Do not reach into the filling
shaft.
Only use the pusher to push
down ingredients.
¡ Improper use may cause injuries.
Only use the accessories once
fully assembled.
The accessories should only be
used in the intended operating
position.
Note:The continuous feed shredder
can only be used if the bowl is fitted
properly.
Tip:For optimum results, process
thin ingredients in bunches.
1. Prepare your food.
Cut large items of food into pieces
so they fit into the filling shaft.
2. Insert the mains plug.
3. Set the rotary switch to the recom-
mended speed.
→Fig.
15
4. Insert the food into the filling shaft
and press down with the pusher,
applying light pressure.
→Fig.
16
5. Stop processing if
‒ all food has been processed.
‒ the food in the bowl almost
reaches the outlet opening of
the continuous shredder.
6. Set the rotary switch to .
Loading ...
Loading ...
Loading ...