Loading ...
Loading ...
Loading ...
42
en-us Troubleshooting
3
Troubleshooting
Troubleshooting
Dishwashers may occasionally exhibit problems that are
unrelated to a malfunction of the dishwasher itself. The
following information may help you with a dishwasher
problem without involving a repair professional.
Note: If the appliance stops during dishwashing or does
not start for any obvious reason, first run the cancel
wash cycle function (Reset).
9 WARNING
Improper repairs or use of non-original
replacement parts may cause considerable
damage and put the user at considerable risk!
Always have repairs carried out by authorized
technicians. If a component has to be replaced,
always use original replacement parts.
Error message
Some faults are indicated at the top of the display
window @ and on the front display * ): and possible
remedies are offered (for example Filter system soiled
(E22) -->Clean filters).
* optional feature which may or may not be included with
your dishwasher.
Fault table
Fault Cause Remedial action
Error code “:‚‰ is lit. Supply hose kinked. Install supply hose without kinks.
Water supply turned off. Turn on the water supply.
Water supply jammed or calcified. Turn on the water supply.
Flow rate must be min. 10 l/min. when water
supply is open.
Filter in the water supply blocked. Switch off the dishwasher and pull out the
power supply plug. Turn off the tap.
Unscrew water connection.
Clean filter in the supply hose. Screw water
connection on again. Check for leaks.
Reconnect power supply. Switch on the
dishwasher.
Error code “:‹ˆ is lit. Intake opening (on right inside of
dishwasher) covered by dishes.
Arrange dishes so that the intake opening is
not obstructed.
Error code “:‚ƒ is lit. Heating element calcified or soiled. Clean dishwasher with a dishwasher
cleaning agent or descaler. Operate the
dishwasher with water softening system and
check the setting.
Error code “:ƒƒ is lit. Filters 1j are soiled or blocked. Clean filters. ~ "Filters" on page 39
Error code “:ƒ… is lit. Waste-water hose kinked or blocked. Install hose without kinks, remove any
residue.
Siphon connection still sealed. Check connection to siphon and open if
required.
Cover on the drain pump loose. Lock cover correctly. ~ "Drain pump"
on page 41
Loading ...
Loading ...
Loading ...