Loading ...
Loading ...
Loading ...
35
Operating the Dishwasher en-us
Zeolite Drying
9 WARNING
Risk of burns!
Never touch the zeolite outlet cover 1R. It
becomes very hot during the cycle and could
cause burns if touched.
9 CAUTION!
Please ensure that the intake opening 1J is not
obstructed and do not place any temperature-
sensitive dishware or utensils in the lower basket
at the rear right side above the zeolite outlet
cover 1R.
The appliance features a zeolite container. Zeolite is a
mineral which can store moisture and heat energy
and release them again.
During the washing step this heat energy is used to dry
the mineral and heat up the rinsing water.
During the drying phase moisture from the rinsing
compartment is stored in the mineral and heat energy
is released. This released heat energy is blown into
the rinsing compartment with dry air. This accelerates
and improves drying.
These processes therefore save a great deal of energy.
Time display
The wash cycle time is determined during the wash
cycle by the water temperature, the amount of dishes, as
well as the degree of soiling and may vary (depending
on the selected wash cycle). You can change the time
display into time of day or hours/minutes so that the
remaining cycle time of the wash cycle appears in the
display window “Finish at” (for example 15:20 o’clock)
or “Finish in” (for example 3:25 hours).
Opening the door
To open the door, press the upper middle part of the
door. The appliance opens automatically.
If you have activated the child-proof lock, press twice in
quick succession at the upper middle part of the door.
Sensor setting
The wash cycle sequence is optimized in Auto wash
cycles with the aid of sensors. The sensors adjust the
wash cycle strength of Auto wash cycles depending on
the amount and type of soiling. You can adjust the
sensitivity of the sensors in 3 stages.
Standard: This setting is recommend for daily regular or
typical use. This is the most energy efficient setting.
Sensitive: This setting adjusts the wash cycle strength
for the effective removal of food remnants, even if the
amount of soiling is low. The energy and water
consumption is increased accordingly.
Very sensitive: This setting adjusts the wash cycle
strength for difficult conditions of use, for example
firmly dried on food remnants. This setting is
recommended if using biological or eco detergents
which contain lower amounts of active agents. The
energy and water consumption is increased accordingly.
Extra Dry
The final rinse uses a higher temperature which
improves the drying result. The cycle time may increase
slightly. (Caution if utensils are delicate!) You can
switch the Extra Dry function on or off. There is a slight
increase in energy consumption.
Eco forecast
When Eco forecast is activated, the average water and
energy consumption of the selected wash cycle is
briefly displayed in the digital display @.
Auto power off
This setting determines the length of time the control
panel stays illuminated after the cycle is complete.
To save energy, the recommended setting is “after one
minute”.
Possible settings are:
▯ off: The appliance does not switch off automatically.
▯ After one minute: The appliance switches off after
1 minute. This is the most energy efficient setting.
▯ After two hours: The appliance switches off after
2 hours.
Loading ...
Loading ...
Loading ...