Loading ...
Loading ...
Loading ...
4 Care and maintenance
4.2 Metal grease filters
The metal grease filters should be cleaned at least every two months with normal use
(more frequently with intensive use) and whenever the saturation indicator alarm is
triggered. If properly cared for, the grease filters should provide years of service.
Removing
1
2
▸ Fold down the metal grease filters at the front and carefully remove from the slots
in the fixture.
Cleaning
▸ Clean the metal grease filters in the dishwasher. Select the «intensive» dishwasher
programme. If no dishwasher is available: Soak the grease filters in hot water and mild
detergent.
▸ Clean, rinse well with clean cold water and then wipe dry.
– Grease filters can be used again after being cleaned.
▸ Put the metal grease filters back.
▸ Reset saturation indicator alarm (see page 15).
Cleaning may cause the metal grease filters to become slightly discoloured. How-
ever, this will not affect the functioning of the filters in any way.
4.3 Reset saturation indicator alarm
Reset the saturation indicator alarm for the metal grease filters (LED for the button
flashes) after cleaning/replacing.
▸ Hold the button depressed for 5 seconds.
– If reset successfully, the LED for the button will stop flashing.
4.4 Replacing the LED light bulbs
For safety reasons, the LED light bulbs must be replaced by our Customer Services.
15
Loading ...
Loading ...
Loading ...