Loading ...
Loading ...
Loading ...
EN 13
English
4 Get started
Caution
Use of controls or adjustments or performance of •
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat, •
sunshine or fi re. Never discard batteries in fi re.
1 Open the battery compartment.
2 Insert two AAA batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Note
Before you press any function button on the remote •
control, fi rst select the correct source with the remote
control instead of the main unit.
If you are not going to use the remote control for a
•
long time, remove the battery.
Set the clock
1
In the standby mode, press and hold
CLOCK on the remote control to
activate the clock setting mode.
» [CLOCK SET] is displayed briefl y.
The hour digits are displayed and begin »
to blink.
2 Press VOLUME -/+ ( + VOL - on the
remote control) to set the hour.
3 Press CLOCK again.
The minute digits are displayed and »
begin to blink.
4 Press VOLUME -/+ ( + VOL - on the
remote control) to set the minute.
5 Press CLOCK to confi rm.
Note
This system only supports 24-hour mode. •
The clock setting will be erased when the system is •
disconnected from the power supply.
The system will exit clock setting mode if no button is
•
pressed within 30 seconds.
Turn on
1
Press STANDBY-ON/ECO POWER
(STANDBY-ON
on the remote
control).
» [HELLO] is displayed briefl y.
The unit switches to the last selected »
source.
2 Wait for automatic setup of wireless
connection between the main unit and
subwoofer.
» [PAIRING] fl ashes.
If the connection succeeds, » [PAIR
OK] is displayed and both the blue
and green LED indicators on the
subwoofer light up.
If the connection fails, » [PAIR FAIL] is
displayed and only the blue indicator
on the subwoofer lights up.
If the wireless connection fails, set up »
the connection manually.
In case the wireless connection fails, you can:
Loading ...
Loading ...
Loading ...