Loading ...
Loading ...
Loading ...
– 7
Remove all packaging material ex-
cept the wooden palette.
Insert the pushing handle in the
grooves on the appliance.
Fasten the pushing handle with the
4 screws enclosed in the packet.
Fasten the covering flaps.
Hang in the strain relief clamp at the
pushing handle.
Lock the rear wheels; remove the
wooden blocks used for stopping
the wheels.
Four indicated floor boards of the
pallet are fastened with screws. Un-
screw these boards.
Place the boards on the edge of the
pallet. Place the boards in such a
way that they lie in front of the four
wheels of the machine. Fasten the
boards with screws.
Slowly push the machine down
from the ramp.
Note:
At the time of manufacturing the appli-
ance, it has already been flused using
an anti-frost agent. Before starting the
machine for the first time, you need to
first remove the anti-frost agent.
Fill in 10 litres of fresh water in the
fresh water reservoir.
Press the foot pedal.
Set the machine switch to basic
cleaning.
Keep the machine running until the
pressure on the manometer falls.
DANGER
Risk of injury! The appliance can get
stuck and be dragged away by the
travellator/ escalator. Before starting
cleaning, check the stepping areas and
the ridge profile to see that there are no
deformations or any objects stuck
therein. To be on the safer side, make
sure that you know where the emer-
gency switch-off button of the travella-
tor/ escalator is located.
Cordon off the travellator/ escalator
as long as cleaning operations are
on and the stepping areas are still
wet.
Switch on the travellator/ escalator.
Ensure that the running direction of
the travellator/ escalator is away
from the machine.
Before Startup
Installing the pushing handle
Unloading
Removing anti-frost agents
Start up
Preparing the travellator/
escalator
9EN
Loading ...
Loading ...
Loading ...