Loading ...
Loading ...
Loading ...
– 9
– First clear off loose, coarse dust
manually.
– Remove hard objects (such as
stones) from the ridges of the steps.
– Clean the front side of the escalator
steps manually.
– Clean the stepping areas in over-
lapping strips. To do that, first
move the appliance from the work-
ing position and place it on the side.
– Observe the steps while cleaning.
They should be moist but not wet.
There should not be any foam resi-
due.
– First do moist cleaning (with deter-
gent liquid) and then dry (by setting
the appliance to dry vacuum clean-
ing).
– Then clean using clear water so as
to remove detergent residues.
DANGER
Risk of injury and electrical shock! Al-
ways lay the extension cable in such a
way that it does not get jammed or
crushed and also does not cause
somebody to stumble over it.
Plug in the mains plug.
Insert the end of the extension ca-
ble as a loop in the strain relief
clamp.
Lock the rear wheels.
Place the machine on the platform
in such a way that the front wheels
do not touch the first step of the
moving travellator/ escalator.
Press pedal for lowering the brush
head. The brush head will be low-
ered and the lock lever will arrest in
its position.
Press the foot pedal with one foot
and while doing so move the ma-
chine a little back and forth towards
the side. The machine will position
itself centrally in the grooves of the
steps; you will then hear a rustling
sound.
DANGER
Risk of injury! Do not push the appli-
ance onto the escalator any further
than the indications given below. Oth-
erwise, the machine will get dragged
off by the escalator. In case of danger,
immediately press the emergency stop
switch of the escalator.
The cleaning head must lie flat on the
escalator.
Tips for cleaning
Cleaning operations
11EN
Loading ...
Loading ...
Loading ...