Loading ...
Loading ...
Loading ...
Step 8
Make sure the wire terminal passes
though the hole on the air house
(fig. )
Step 9
Connect as shown the wire terminal and the
controller terminal(fig. ). Ensure the wire
supplied cover secure firmly with three
screws (7)(fig. ).
Step 10
Install the aspiration plate to the hood body.
Fit the right bracket on the aspiration plate
to the right fixed hinge(fig. ),then push
the left hinge to the end to match the hole
of the left bracket on the plate and release
the hinge to lock them(fig. ).
12 ENGLISH
Fig.
Fig.
Fig. Fig.
IMPORTANT
Before hooking the hood onto the truss,
please make sure the aspiration plate
and filter have been removed from the
body to avoid it fall and injury to installer.
Fig.
18
19
20
21
Hook the hood body onto the truss,
ensuring it fits properly, secure the body to
the truss with 12 screws (7) then tighten
it(fig. ).
17
IMPORTANT
16
The hole on the air house
17
18
19
20 21
Loading ...
Loading ...
Loading ...