Loading ...
Loading ...
Loading ...
56
General Specifications
Amplifier (Audio) section
Rated Output Power (FTC)
With 8 ohm loads, both channels driven, from 20-
20,000 Hz; rated 100 watts per channel minimum RMS
power, with no more than 0.08% total harmonic distortion
from 250 milliwatts to rated output.
Maximum Effective Output Power
2 ch k 170 W at 6 ohms, 1 kHz, 2 ch driven of 10% THD
Dynamic Power (*)
(*)IEC60268-Short-term maximum output power
240 W (3 ≠, Front)
210 W (4 ≠, Front)
120 W (8 ≠, Front)
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20,000 Hz, half power)
Input Sensitivity and Impedance (1 kHz, 100 W/8 ≠)
200 mV/47 k≠ (LINE (Unbalance))
3.5 mV/47 k≠ (PHONO MM)
Rated RCA Output Level and Impedance
1 V/470 ≠ (SUBWOOFER PRE OUT)
200 mV/2.3 k≠ (ZONE LINE OUT)
Phono Overload
70 mV (MM 1 kHz, 0.5%)
Frequency Response
10 Hz - 100 kHz/i1 dB, j3 dB (Direct)
Tone Control Characteristics
n10 dB, 90 Hz (Bass)
n10 dB, 7.5 kHz (Treble)
Signal to Noise Ratio
106 dB (IHF-A, LINE IN, SP OUT)
80 dB (IHF-A, PHONO IN, SP OUT)
Speaker Impedance
4 ≠ - 16 ≠
Headphone Output Impedance
330 ≠
Headphone Rated Output
80 mW (32 ≠, 1 kHz, 10% THD)
Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz
AM Tuning Frequency Range
530 kHz - 1710 kHz
Preset Channel
40
Network Section
Ethernet LAN
10BASE-T/100BASE-TX
Wireless LAN
IEEE 802.11 a/b/g/n standard
(Wi-Fi
®
standard)
5 GHz/2.4 GHz band
BLUETOOTH Section
Communication system
BLUETOOTH Specification version 4.1+LE
Frequency band
2.4 GHz band
Modulation method
FHSS (Frequency Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
A2DP 1.2
AVRCP 1.3
HOGP-Host (Client)
HOGP-HID Device (Server)
HID Service (HIDS)
Supported Codecs
SBC
AAC
Transmission range (A2DP)
20 Hz - 20 kHz (Sampling frequency 44.1 kHz)
Maximum communication range
Line of sight approx. 48 ft. (15 m) (*)
(*)The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
microwave oven, static electricity, cordless phone,
reception sensitivity, antenna’s performance, operating
system, software application, etc.
General
Power Supply
AC 120 V, 60 Hz
Power Consumption
260 W
0.1 W (Stand-by)
35 W (No-sound)
4.2 W (HDMI Standby Through)
2.6 W (Network Standby)
Dimensions (W k H k D)
17-1/8z k 5-7/8z k 12-15/16z
435 mm k 149.5 mm k 328.5 mm
Weight
18.7 lbs/8.5 kg
HDMI
Input
IN1 (BD/DVD), IN2 (CBL/SAT), IN3 (PC), IN4 (GAME)
Output
OUT
Supported
Deep Color, x.v.Color
TM
, LipSync, Audio Return
Channel, 3D, 4K 60Hz, CEC, Extended Colorimetry
(sYCC601, Adobe RGB, Adobe YCC601), Content Type,
HDR
Audio Format
DSD, PCM
Maximum Video Resolution
4k 60 Hz (YCbCr 4:4:4)
Compatible input resolutions
HDMI input
4K, 1080p/24, 1080p, 1080i, 720p, 480p/576p
Composite input
480i/576i
0 The output from the HDMI OUT jack to the TV is the
same resolution as the input.
> Before Start > Part Names > Install > Initial Setup > Playback
Advanced Setup | Supplementary Information | Others
Loading ...
Loading ...
Loading ...