Loading ...
Loading ...
Loading ...
4
Part Names
Part Names
Front Panel
1. Í On/Standby button
2. Speaker A/Speaker B button: Used to switch between outputting and turning off output
from speakers connected to the SPEAKERS A or B terminal.
3. Remote control sensor: Receives signals from the remote controller.
0 The signal range of the remote controller is within about 16y/5 m, at an angle of 20° on
the perpendicular axis and 30° to either side.
4. Hybrid Standby indicator: Lights if the unit enters standby mode when the features are
enabled that continue to work when this unit is in standby, such as HDMI Standby
Through and Network Standby.
5. Display button: Switches the information on the display. You can display information such
as the input source, volume, and input format when pressed repeatedly during play.
6. Display (P5)
7. Setup button: You can show advanced setting items on the TV and display to provide you
with an even better experience (P31).
8. Cursors (D / C / B / A), Enter button: Select the item with the cursors and press Enter
to confirm. Use them to tune to stations when using TUNER (P25).
9. Return button: Returns the display to the previous state during setting.
10.
Master Volume
11.
Phones jack: Connect stereo headphones with a standard plug (Ø1/4z/6.3 mm diameter).
12.
Dimmer button: You can adjust the brightness of the display in three steps. It cannot be
turned off completely.
13.
Zone 2 button: Controls the multi-zone function (P29).
14.
Off button: Switches the multi-zone function off (P29).
15.
Input dial: Switches the input to be played.
16.
Bass dial: Adjusts the bass.
17.
Treble dial: Adjusts the treble.
> Before Start > Part Names > Install > Initial Setup > Playback
Advanced Setup | Supplementary Information | Others
Loading ...
Loading ...
Loading ...