Loading ...
Loading ...
Loading ...
Transfer Function
61
3. Answering
Machine
Turning the Transfer function on and off
When you go out and wish to use the Transfer function, turn it on as follows:
1 Press once and once.
2 Press once and 4 times.
3 Press .
4 Press to turn on the Transfer
function.
(Press to turn the function off.)
5 Press the number of the box for which you want the Transfer function to
operate (for the general box, press ).
6 Press to return to the date and time display.
7 Each time the machine receives an incoming message, it will call your
programmed transfer number. When you answer, you will hear your
recorded message telling you that the call is a transfer call. On the dial
pad of your phone, enter , your remote code number (see page 62) if
the general box was selected in Step 5, or the box passcode number if a
personal box was selected, and then . Your messages will play.
• You can also perform any of the remote operations described in Remote
Operations later in this chapter (see page 62).
Note: When you hang up after a transfer call, the machine will not
immediately resume normal operation. If you want the machine to accept calls
immediately after a transfer call, enter twice before hanging up (if
hanging up during message playback, first enter and to stop
playback, then enter twice).
FUNCTION
1
2
0
STOP
0
TRANSFER FUNC
Display:
T.A.D. SETTING
1=YES, 2=NO
The display briefly shows
your selection, then:
ON TAD FAILURE
all.bookPage61Friday,May31,20029:49AM
Loading ...
Loading ...
Loading ...