Loading ...
Loading ...
Loading ...
Problem solving guide
109
Problem Possible cause and remedy
The sensor
controls or the
proximity sensor
do not respond.
You have selected the Display| QuickTouch| Off setting.
When this is activated, the sensor controls and proximity
sensor do not respond when the oven is switched off.
As soon as the oven is switched on, the sensor controls
and the proximity sensor will respond. If you want the
sensor controls and the proximity sensor to respond
even when the oven is switched off, select the Display|
QuickTouch| On setting.
The settings for the proximity sensor are switched off.
Change the settings for the proximity sensor by
selecting Settings| Proximity sensor.
The proximity sensor is defective.
Call Miele.
The oven is not connected to the power supply.
Make sure that the plug is correctly inserted in the
socket and that the socket switch has been switched to
on.
Check if the circuit breaker has tripped. Contact a qualified
electrician or Miele.
If the display does not respond, there is a fault with the
controls.
Touch and hold the On/Off sensor until the display
switches off and the oven restarts.
System lock
appears in the
display when the
oven is switched
on.
The system lock has been switched on.
You can deactivate the system lock for a cooking programme
by touching the symbol for at least 6seconds.
If you want to permanently deactivate the system lock,
select theSafety| System lock | Off setting.
Power cut -process
cancelled appears
in the display.
There has been a brief power cut. This has caused the
current cooking programme to stop.
Switch the oven off and then back on again.
Restart the cooking programme.
12:00 appears in
the display.
The power supply was interrupted for longer than 150 hours.
Reset the time and date.
Loading ...
Loading ...
Loading ...