Loading ...
Loading ...
Loading ...
BATTERY LEVEL LED INDICATORS
RECHARGING YOUR PHOENIX 300
AC Outlet (2)
Total Continuous Output
110V / 60Hz (US, JP, CA)
220V / 50Hz (AU, EU, CN)
200W Rated, 350W Surge
Pure Sine Wave
300W Max
CIG Port
D-Tap Port
11-17V / 10A Max
11-17V / 10A Max
When recharging your PHOENIX 300, one of the Battery Level LED Indicators will flash. The flashing LED
indicates the unit’s current battery level. Once your PHOENIX 300 is fully recharged, all Battery Level LED
Indicators will be lit and remain solid.
When the battery level of PHOENIX 300 is lower than 15%, the last Battery Level LED Indicator will flash twice
per second.
As you use your PHOENIX 300 to power other devices, the Battery Level LED Indicators will go out one by
one to indicate the remaining battery capacity.
Four Battery Level LED Indicators indicate the battery level of the PHOENIX 300, approximating 25% - 50%
- 75% - 100% capacity.
To shorten the recharge time of PHOENIX 300, it is recommended to disconnect all loads while
recharging the unit.
NOTE
To maximize battery life, be sure to fully recharge your PHOENIX 300 before operating or
storing.
If the Battery Level LED Indicators flash in an unusual way, your PHOENIX 300 may need
special attention. Please refer to the TROUBLESHOOTING section for help.
Recharge Time
Recharge via USB-C PD Wall Charger: 6 Hours
Recharge via both AC/DC Adapter and USB-C PD Wall Charger: 3.5 Hours
Recharge via AC/DC Adapter: 8 Hours
Recharge via Solar: 8 Hours
CAUTION
CAUTION
- 07 -
Loading ...
Loading ...
Loading ...