Loading ...
Loading ...
Loading ...
UC2024 and UC2724 User Manual
November 2019
Page 11
Ice Too Thin
Ice Too Thick
Ice Just Right
Bridge Thickness
Ice Thickness Diagram
For The Technician: Ice Bridge
Thickness Adjustment
Note: The bridge thickness adjustment is used
to obtain the CORRECT size, not to adjust to
individual preferences. Do NOT make the ice
bridge too thick or too thin, as either will reduce
ice making capacity. Do NOT attempt to adjust the
machine to release individual cubes. There is only
ONE correct size.
Refer to the Ice Thickness Diagram for proper ice
size.
Access the controller by removing the front panel and
pulling out the electrical panel drawer.
Adjust by pushing the + sign or – sign on the ice
bridge adjustment section of the control panel.
Changing bridge thickness should be a one-time
adjustment as the machine will automatically maintain
that ice thickness.
Controller Diagram: Adjustment Indicator Lights
Each push and release of the + or - button will change
the lights that glow or blink indicating a change in ice
size.
Example: pushing + one time changes a blinking light
to steady on type. If the lights are on steady a single
push of + will add one more light to the right and it will
blink.
There are 10 settings. All 5 lights on steady is
the maximum setting and one blinking light is the
minimum.
Electrical Shock Hazard
Disconnect electrical
power before beginning
This Section Not Used
Loading ...
Loading ...
Loading ...