Loading ...
Loading ...
Loading ...
Starting and operating 7-17
! CONTINUED !
: With the brake pedal depressed,
move the lever along the gate.
: Move the lever along the gate.
The selector lever has seven positions.
P (Park)
This position is for parking the vehicle and
starting the engine.
In this position, the transmission is me-
chanically locked to prevent the vehicle
from rolling freely.
When you park the vehicle, first set the
parking brake fully, then shift into the #P$
position. Do not hold the vehicle with only
the transmission.
A shift interlock function is employed in
the automatic transmission system to en-
sure safe starting of the vehicle.
To shift the selector lever from the #P$ to
the any other position, you have to de-
press the brake pedal fully when the igni-
tion switch is in the #ON$ position. This
prevents the vehicle from lurching when it
is started.
If the shift lever does not move from the
#P$ position with the brake pedal de-
pressed, refer to the #Shift lock release$
section in this chapter.
R (Reverse)
This position is for backing the vehicle.
To shift from the #N$ to #R$ position, first
stop the vehicle completely then move the
lever to the #R$ position.
N (Neutral)
This position is for restarting a stalled en-
gine.
In this position the wheels and transmis-
sion are not locked. In this position, the
transmission is neutral; the vehicle will roll
freely, even on the slightest incline unless
the parking brake or foot brake is on.
Avoid coasting with the transmission neu-
tral.
During coasting, there is no engine brak-
ing effect.
NOTE
If you stop the engine with the selector
lever in the #N$ position, move the se-
lector lever to the #P$ position immedi-
ately. Otherwise, you may find that the
selector lever soon cannot be moved
to the #P$ position. If you find that the
selector lever cannot be moved from
the #N$ position to the #P$ position,
turn the ignition switch to the #ON$ po-
sition and try again.
D (Drive)
This position is for normal driving.
The transmission automatically shifts into
a suitable gear from 1st to 4th according to
the vehicle speed and the acceleration
you require.
When more acceleration is required in this
position, press the accelerator pedal fully
to the floor and hold that position. The
transmission will automatically downshift
to 3rd, 2nd or 1st gear. When you release
the pedal, the transmission will return to
700332
Do not drive the vehicle with the se-
lector lever in the #N$ (neutral) posi-
tion. Engine braking has no effect in
this condition and the risk of an ac-
cident is consequently increased.
Loading ...
Loading ...
Loading ...