Loading ...
Loading ...
Loading ...
Instruments and controls 3-23
! CONTINUED !
High/low beam change (dim-
mer)
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light # $ on the instru-
ment panel is also on.
To switch back to low beam, pull the lever
back to the detent position.
Headlight flasher
To flash the headlights, pull the lever to-
ward you and then release it. The high
beam will stay on for as long as you hold
the lever. The headlight flasher works
even though the lighting switch is in the
#OFF$ position.
When the headlights are on high beam,
the high beam indicator light # $ on
the instrument panel also comes on.
Daytime running light system
WRX-STI
The low beam headlights, tail lights, park-
ing lights, and license plate lights will au-
tomatically come on when the engine has
started, under the following conditions:
The parking brake is fully released.
The light switch is in the #OFF$ or
# $ position.
The automatic transmission selector le-
ver is set at other than the #P$ position.
Except WRX-STI
The low beam headlights will automatical-
ly come on at reduced brightness when
the engine has started, under the follow-
ing conditions:
The parking brake is fully released.
The light switch is in the #OFF$ or
# $ position.
The automatic transmission selector le-
ver is set at other than the #P$ position.
300128
Do not hold the lever in the flashing
position for more than just a few
seconds.
300129
The side marker lights are not
turned on by the daytime running
light system. The light switch must
always be turned to the # $ po-
sition when it is dark outside.
Loading ...
Loading ...
Loading ...