Loading ...
Loading ...
Loading ...
-8-
Camera:
Normal camera:
HOW TO REVIEWING PHOTOS/VIDEOS ON A COMPUTER
Insert the microSD card into device.
The drone comes equipped with a built-in 720p (1280*720) camera which can be used
to record data during flight. This camera is located on the front side of the drone. To store
data retained during flight, the drone also has a built-in microSD card slot which can support
up to a 32GB microSD card. All data retained by the device will be stored via a microSD card
and can be viewed via a mobile device or computer.
To review photos and videos, please insert one end of
the data cable into the USB port of the drone. Insert
the other end into a USB port on the computer. Open
"File Explorer" and locate the related file from which
you can view photos and videos.
Note: The drone is not compatible
with microSD cards above 32GB
To record video while using the drone’s controller, you must enable record mode on the drone.
Record mode can be enabled by flying the drone or by pressing and holding the Photo/Video
button, located on the top right corner of the drone’s controller for 3 seconds.
Once recording mode has been enabled, press and hold the Photo/Video button for 3 seconds
to start recording video. Once recording has begun, the drone will have a flashing blue light on
the bottom. This indicates the drone is actively recording video. To store the recording, you must
end the recording. If you do not end the recording properly the footage will not be saved to the
microSD card.
To end a recording, press and hold the Photo/Video button again for 3 seconds. This will stop
the drone from recording video. Once a recording has been stopped the flashing blue light will
disappear and a solid red light will be visible on the bottom of the drone. Once the recording has
been stopped, the footage will be saved to the microSD card and will be available to review.
Recording/Snaphot
Photo/Video Button
Loading ...
Loading ...
Loading ...