Loading ...
Loading ...
Loading ...
20
English
Cleaning the Capp in Cup system
Capp in Cup system Cleaning Programmes
The machine allows two cleaning programmes for the Capp in Cup system: quick
and deep clean. Both programmes can be selected with the CLEAN/SET
clean/setting
button. Press the “CLEANING” button upon selection.
Quick clean is also recommended after dispensing a milk-based beverage. For both
programmes, follow the instructions shown on the display.
- Quick clean programme
The quick clean programme includes the milk circuit cleaning with hot water.
- Deep clean programme
The deep clean programme for the Capp in Cup system includes also the deep
cleaning of the whole milk circuit by means of Philips “Milk Circuit Cleaner”.
Cleaning of the Capp in Cup system under running
water
Warning: the steam tube may be hot after use.
1 Remove the Capp in Cup system from the steam tube (Fig. 23).
2 Remove the rubber handle from the steam tube. (Fig. 24).
3 Remove the Capp in Cup system spout (Fig. 25).
4 Remove the milk suction tube from the main body of the Capp in Cup system
(Fig. 26).
5 To disassemble the main body:
- hold it tight from the sides as shown (Fig. 27);
- pull and extract the left part as shown in gure (Fig. 28);
6 Remove the rubber lid (Fig. 29).
7 Disassemble the glass milk carafe (Fig. 30).
8 Wash all components under running water.
9 After cleaning, reassemble all the components by following the same
procedure in reverse order.
4219-465-02541 MAN. GAG. MAGENTA Milk EN-NL-PL Rev 03.indd 20 21/01/2021 11:33:16
Loading ...
Loading ...
Loading ...