Loading ...
Loading ...
Loading ...
18 English
7. Allow the EPA filter set, cyclone
body, cyclone filter and dust contain-
er to dry completely
.
8. Insert the cyclone body into the cy-
clone filter, and turn the cyclon
e
body clockwise to latch into place.
9. Insert the cyclone set into the dust
co
ntainer.
10.Install the EPA filter set on the up-
per section of the cyclone set,
and
align.
11.Align the mounting point on the ap-
pliance with the desired mounting
hole on the dust container, and latch
the dust container into place.
Cleaning / replacing the brush
roller
Note
Replace the brush roller when it is
damaged.
Only dry brush roller is allowed for
replacement.
Do not dry the brush roller using a
hair dryer.
Flat brush roller floor nozzle
1. Remove the brush roller using a coin
or a straight screwdriver.
2. Remove the roller lever from the
brush roller.
1 Brush roller
2 Roller lever
21
Loading ...
Loading ...
Loading ...